Workshop & Manufacturing
Stepper Travel Resolution & Calibration Calculator
Calculate nominal motion resolution and correct travel calibration from commanded versus measured movement.
How the calculation works
Nominal commanded steps per mm = steps*microsteps*gear/travel steps/mm. Nominal microstep travel = travel/(steps*microsteps*gear) mm. Corrected steps per mm = steps*microsteps*gear/travel*commanded/measured steps/mm. Corrected output rotation distance = travel*measured/commanded mm/rev.
Worked example
Example inputs — Motor full steps per revolution: 200; Microsteps per full step: 16; Motor revolutions per output revolution: 1; Travel per output revolution (mm): 40; Commanded test travel (mm): 100; Measured test travel (mm): 98. Expected results — Nominal commanded steps per mm: 80 steps/mm; Nominal microstep travel: 0.0125 mm; Corrected steps per mm: 81.63265306 steps/mm; Corrected output rotation distance: 39.2 mm/rev.
Assumptions and limits
Geometric command resolution is not positional accuracy. Calibration assumes the discrepancy is a constant scale error, not backlash, slip or missed steps. Rotation distance here is output travel per revolution with the gear ratio specified separately.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Milling Speed, Feed, Removal & Time Calculator
- Turning Pass Time, Removal & Finish Calculator
- Ball Nose Effective Diameter & Scallop Calculator
- Radial Chip Thinning Feed Correction Calculator
- Drill Point, Feed Travel & Time Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.