Workshop & Manufacturing
Ball Nose Effective Diameter & Scallop Calculator
Calculate ball-tip contact diameter and ideal parallel-pass scallop height on a flat surface.
How the calculation works
Effective contact diameter = 2*sqrt(diameter*depth-depth**2) mm. Effective cutting speed = pi*2*sqrt(diameter*depth-depth**2)*rpm/1000 m/min. Ideal remaining scallop height = (diameter/2-sqrt((diameter/2)**2-(stepover/2)**2))*1000 µm.
Worked example
Example inputs — Ball diameter (mm): 10; Tip engagement depth (mm): 1; Parallel pass stepover (mm): 2; Spindle speed (rpm): 10000. Expected results — Effective contact diameter: 6 mm; Effective cutting speed: 188.4955592 m/min; Ideal remaining scallop height: 101.0205144 µm.
Assumptions and limits
Planning arithmetic, not a machine setup recommendation. Toolmaker limits, workholding, runout, material, cooling and machine capability must be checked separately. Flat horizontal surface, perpendicular tool axis and perfect spherical tip. Surface slope and tool tilt change the actual contact zone.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Milling Speed, Feed, Removal & Time Calculator
- Turning Pass Time, Removal & Finish Calculator
- Radial Chip Thinning Feed Correction Calculator
- Drill Point, Feed Travel & Time Calculator
- Circular Interpolation Tool-Centre Feed Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.