Workshop & Manufacturing
Drill Point, Feed Travel & Time Calculator
Include conical drill-point travel when estimating full-diameter through-hole drilling time.
How the calculation works
Drill point length = diameter/(2*tan(angle*pi/360)) mm. Total tip feed travel = thickness+diameter/(2*tan(angle*pi/360))+breakthrough mm. Feed-only duration = (thickness+diameter/(2*tan(angle*pi/360))+breakthrough)/(rpm*feed)*60 s. Full-diameter removal rate = pi*diameter**2/4*rpm*feed/1000 cm³/min.
Worked example
Example inputs — Drill diameter (mm): 10; Included drill point angle (degrees): 90; Work thickness (mm): 20; Additional tip breakthrough allowance (mm): 1; Spindle speed (rpm): 1000; Feed per revolution (mm): 0.1. Expected results — Drill point length: 5 mm; Total tip feed travel: 26 mm; Feed-only duration: 15.6 s; Full-diameter removal rate: 7.853981634 cm³/min.
Assumptions and limits
Planning arithmetic, not a machine setup recommendation. Toolmaker limits, workholding, runout, material, cooling and machine capability must be checked separately. Ideal conical point. Pecking, retracts, spotting, entry transients and spindle acceleration are excluded.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Milling Speed, Feed, Removal & Time Calculator
- Turning Pass Time, Removal & Finish Calculator
- Ball Nose Effective Diameter & Scallop Calculator
- Radial Chip Thinning Feed Correction Calculator
- Circular Interpolation Tool-Centre Feed Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.