Workshop & Manufacturing
Milling Speed, Feed, Removal & Time Calculator
Build a milling pass estimate from recommended cutting speed, chip load and engagement.
How the calculation works
Spindle speed = 1000*speed/(pi*diameter) rpm. Table feed = 1000*speed/(pi*diameter)*chip*teeth mm/min. Material removal = axial*radial*1000*speed/(pi*diameter)*chip*teeth/1000 cm³/min. Feed-only time = travel/(1000*speed/(pi*diameter)*chip*teeth) min. Net cutting power = axial*radial*1000*speed/(pi*diameter)*chip*teeth*specific/60000000 kW.
Worked example
Example inputs — Effective cutting diameter (mm): 20; Chosen cutting speed (m/min): 100; Chosen feed per tooth (mm): 0.05; Effective teeth: 4; Axial engagement (mm): 2; Radial engagement (mm): 5; Total feed travel (mm): 100; Specific cutting force (N/mm²): 1500. Expected results — Spindle speed: 1591.549431 rpm; Table feed: 318.3098862 mm/min; Material removal: 3.183098862 cm³/min; Feed-only time: 0.3141592654 min; Net cutting power: 0.07957747155 kW.
Assumptions and limits
Planning arithmetic, not a machine setup recommendation. Toolmaker limits, workholding, runout, material, cooling and machine capability must be checked separately. Constant engagement; excludes approach, indexing, acceleration, idle time and drive losses.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Turning Pass Time, Removal & Finish Calculator
- Ball Nose Effective Diameter & Scallop Calculator
- Radial Chip Thinning Feed Correction Calculator
- Drill Point, Feed Travel & Time Calculator
- Circular Interpolation Tool-Centre Feed Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.