Workshop & Manufacturing
Sheet Bend Allowance & Flat Length Calculator
Unfold one bend using a supplied neutral-axis K factor and clearly defined tangent-leg dimensions.
How the calculation works
Bend allowance = bend*pi/180*(radius+k*thickness) mm. Flat length from tangent legs = leg_a+leg_b+bend*pi/180*(radius+k*thickness) mm. Outside setback per side = (radius+thickness)*tan(bend*pi/360) mm. Bend deduction for outside leg dimensions = 2*(radius+thickness)*tan(bend*pi/360)-bend*pi/180*(radius+k*thickness) mm.
Worked example
Example inputs — Sheet thickness (mm): 2; Inside bend radius (mm): 3; Neutral-axis K factor: 0.4; Bend rotation from flat (degrees): 90; Straight tangent leg A (mm): 30; Straight tangent leg B (mm): 40. Expected results — Bend allowance: 5.969026042 mm; Flat length from tangent legs: 75.96902604 mm; Outside setback per side: 5 mm; Bend deduction for outside leg dimensions: 4.030973958 mm.
Assumptions and limits
One ideal constant-radius bend. Legs are straight lengths ending at the bend tangency, not outside flange dimensions. K factor must be measured or validated for the actual material and tooling; springback is excluded.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Milling Speed, Feed, Removal & Time Calculator
- Turning Pass Time, Removal & Finish Calculator
- Ball Nose Effective Diameter & Scallop Calculator
- Radial Chip Thinning Feed Correction Calculator
- Drill Point, Feed Travel & Time Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.