Workshop & Manufacturing
Process Capability Cp, Cpk & Cpm Calculator
Compare process spread, centring and target loss with two specification limits.
How the calculation works
Cp potential capability = (high-low)/(6*sd) index. Cpk centred capability = min(high-average,average-low)/(3*sd) index. Cpm target-adjusted capability = (high-low)/(6*sqrt(sd**2+(average-target)**2)) index. Normal-model out-of-spec probability = normal_cdf((low-average)/sd)+normal_cdf((average-high)/sd) fraction.
Worked example
Example inputs — Lower specification limit: 9; Upper specification limit: 11; Stable process mean: 10; Estimated within-process standard deviation: 0.2; Engineering target: 10. Expected results — Cp potential capability: 1.666666667 index; Cpk centred capability: 1.666666667 index; Cpm target-adjusted capability: 1.666666667 index; Normal-model out-of-spec probability: 5.733031438e-07 fraction.
Assumptions and limits
Requires a stable process and a representative within-process deviation estimate. Normality is assumed only for the probability estimate; no 1.5-sigma shift is applied. This does not test stability, normality or uncertainty in estimated capability.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Milling Speed, Feed, Removal & Time Calculator
- Turning Pass Time, Removal & Finish Calculator
- Ball Nose Effective Diameter & Scallop Calculator
- Radial Chip Thinning Feed Correction Calculator
- Drill Point, Feed Travel & Time Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.