Workshop & Manufacturing

Machined Taper Angle & Offset Calculator

Find half-angle, taper ratio and ideal tailstock offset for a conical workpiece.

How the calculation works

Taper per unit axial length = (large-small)/length mm/mm. Taper half-angle = atan((large-small)/(2*length))*180/pi degrees. Included angle = 2*atan((large-small)/(2*length))*180/pi degrees. Small-angle tailstock offset estimate = between*(large-small)/(2*length) mm.

Worked example

Example inputs — Large diameter (mm): 30; Small diameter (mm): 20; Axial taper length (mm): 100; Distance between centres (mm): 200. Expected results — Taper per unit axial length: 0.1 mm/mm; Taper half-angle: 2.862405226 degrees; Included angle: 5.724810452 degrees; Small-angle tailstock offset estimate: 10 mm.

Assumptions and limits

Planning arithmetic, not a machine setup recommendation. Toolmaker limits, workholding, runout, material, cooling and machine capability must be checked separately. Diametral taper convention. Tailstock offset is the conventional small-angle approximation and is not suitable for every workholding arrangement.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.