Workshop & Manufacturing
Hole & Shaft Limit Fit Clearance Calculator
Compare explicitly entered dimensional limits to identify the complete possible clearance/interference interval.
How the calculation works
Minimum diametral clearance = hole_min-shaft_max mm. Maximum diametral clearance = hole_max-shaft_min mm. Hole tolerance width = hole_max-hole_min mm. Shaft tolerance width = shaft_max-shaft_min mm.
Worked example
Example inputs — Minimum hole diameter (mm): 20; Maximum hole diameter (mm): 20.02; Minimum shaft diameter (mm): 19.98; Maximum shaft diameter (mm): 20.01. Expected results — Minimum diametral clearance: -0.01 mm; Maximum diametral clearance: 0.04 mm; Hole tolerance width: 0.02 mm; Shaft tolerance width: 0.03 mm.
Assumptions and limits
Positive clearance means a gap; negative clearance means interference. If the interval crosses zero, both outcomes are possible. Limits are user supplied: this does not assign or reproduce ISO fit classes, nor calculate press-fit stress.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Milling Speed, Feed, Removal & Time Calculator
- Turning Pass Time, Removal & Finish Calculator
- Ball Nose Effective Diameter & Scallop Calculator
- Radial Chip Thinning Feed Correction Calculator
- Drill Point, Feed Travel & Time Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.