Workshop & Manufacturing

Extrusion Bead Flow & Print Speed Calculator

Compare requested extrusion flow with an independently measured hotend flow limit.

How the calculation works

Bead cross-sectional area = height*(width-height)+pi*height**2/4 if shape == "rounded" else width*height mm². Requested volume flow = (height*(width-height)+pi*height**2/4 if shape == "rounded" else width*height)*speed mm³/s. Flow-limited tool speed = limit/(height*(width-height)+pi*height**2/4 if shape == "rounded" else width*height) mm/s. Requested filament feed speed = (height*(width-height)+pi*height**2/4 if shape == "rounded" else width*height)*speed/(pi*filament**2/4) mm/s.

Worked example

Example inputs — Extruded bead width (mm): 0.5; Layer height (mm): 0.2; Requested tool speed (mm/s): 100; Measured volumetric flow limit (mm³/s): 10; Filament diameter (mm): 2; Bead cross-section: rounded. Expected results — Bead cross-sectional area: 0.09141592654 mm²; Requested volume flow: 9.141592654 mm³/s; Flow-limited tool speed: 109.390129 mm/s; Requested filament feed speed: 2.909859317 mm/s.

Assumptions and limits

Steady bead geometry; ignores pressure transients, die swell and extrusion multiplier. Maximum usable flow must be measured for the actual material, temperature and hotend. This does not predict print adhesion or quality.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.