Workshop & Manufacturing

Bolt Circle Hole Position & Chord Calculator

Locate any indexed hole on an equally spaced bolt circle and calculate adjacent-hole clearance.

How the calculation works

Indexed hole angle = start+360*index/holes degrees. Hole X = cx+pcd/2*cos((start+360*index/holes)*pi/180) mm. Hole Y = cy+pcd/2*sin((start+360*index/holes)*pi/180) mm. Adjacent centre spacing = pcd*sin(pi/holes) mm. Adjacent edge clearance = pcd*sin(pi/holes)-hole_d mm.

Worked example

Example inputs — Pitch circle diameter (mm): 100; Number of holes: 4; Hole index, starting at zero: 0; First hole angle counterclockwise from +X (degrees): 0; Centre X (mm): 0; Centre Y (mm): 0; Hole diameter (mm): 10. Expected results — Indexed hole angle: 0 degrees; Hole X: 50 mm; Hole Y: 0 mm; Adjacent centre spacing: 70.71067812 mm; Adjacent edge clearance: 60.71067812 mm.

Assumptions and limits

Pure coordinate layout, not structural bolt-group design or executable CNC code. Angles increase counterclockwise in the XY plane; a negative edge clearance indicates overlapping holes.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.