Networking
Packetized Voice Call Bandwidth Calculator
Estimate per-call and aggregate transport bandwidth including packetization and per-packet overhead.
How the calculation works
Encoded payload per packet = codec*1000*packet_ms*.001/8 bytes. Packet rate per direction = 1000/packet_ms packets/s. Per-call per-direction wire rate = (codec*1000*packet_ms*.001/8+headers)*8*(1000/packet_ms)/1000 kbps. Aggregate both-directions rate = 2*calls*(codec*1000*packet_ms*.001/8+headers)*8*(1000/packet_ms)/1000 kbps.
Worked example
Example inputs — Encoded voice bitrate (kbps): 64; Audio duration per packet (ms): 20; Total IP/UDP/RTP and wire overhead per packet (bytes): 78; Simultaneous calls: 10. Expected results — Encoded payload per packet: 160 bytes; Packet rate per direction: 50 packets/s; Per-call per-direction wire rate: 95.2 kbps; Aggregate both-directions rate: 1904 kbps.
Assumptions and limits
Offline planning arithmetic: this calculator sends no packets and changes no device configuration. Actual routing, reservations, implementation limits and measured network conditions must be checked separately. Constant encoded bitrate and packet duration; both directions are summed as traffic volume, not necessarily a shared full-duplex bottleneck. Silence suppression, encryption, VLAN and RTCP must be accounted for in assumptions.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- IPv4 Subnet, Host Range & Mask Calculator
- Smallest IPv4 Covering Prefix Calculator
- IPv4 Range to Exact CIDR Blocks Calculator
- IPv4 VLSM Host Requirement Planner
- IPv6 Prefix & Exact Address Capacity Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.