Networking
IPv6 Prefix & Exact Address Capacity Calculator
Calculate a compressed IPv6 network, final address and exact decimal address capacity.
How the calculation works
Network address = ipv6_network(address,prefix) . Final address in prefix = ipv6_last(address,prefix) . Exact number of addresses = ipv6_size(prefix) . Address bits after prefix = 128-prefix bits.
Worked example
Example inputs — IPv6 address without zone ID: 2001:db8:1::1234; IPv6 prefix length: 64. Expected results — Network address: 2001:db8:1::; Final address in prefix: 2001:db8:1:0:ffff:ffff:ffff:ffff; Exact number of addresses: 18446744073709551616; Address bits after prefix: 64 bits.
Assumptions and limits
Offline planning arithmetic: this calculator sends no packets and changes no device configuration. Actual routing, reservations, implementation limits and measured network conditions must be checked separately. Uses exact 128-bit integer arithmetic and RFC 5952-style compression. IPv6 has no broadcast address; final address is not labelled a broadcast. Embedded IPv4 suffixes and zone identifiers are not accepted.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- IPv4 Subnet, Host Range & Mask Calculator
- Smallest IPv4 Covering Prefix Calculator
- IPv4 Range to Exact CIDR Blocks Calculator
- IPv4 VLSM Host Requirement Planner
- Modified EUI-64 IPv6 Interface ID Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.