Networking

IPv4 VLSM Host Requirement Planner

Allocate traditional host subnets inside one parent CIDR block, largest requirement first.

How the calculation works

Allocated addresses including reserved endpoints = vlsm_used(parent,prefix,hosts) addresses. Unallocated parent addresses = vlsm_free(parent,prefix,hosts) addresses. Allocation plan = vlsm_plan(parent,prefix,hosts) .

Worked example

Example inputs — Any IPv4 address inside parent block: 192.168.1.0; Parent CIDR prefix: 24; Required usable hosts per subnet: 50, 20, 10. Expected results — Allocated addresses including reserved endpoints: 112 addresses; Unallocated parent addresses: 144 addresses; Allocation plan: Request 1: 192.168.1.0/26 — 50 hosts requested, 62 usable Request 2: 192.168.1.64/27 — 20 hosts requested, 30 usable Request 3: 192.168.1.96/28 — 10 hosts requested, 14 usable.

Assumptions and limits

Offline planning arithmetic: this calculator sends no packets and changes no device configuration. Actual routing, reservations, implementation limits and measured network conditions must be checked separately. Two addresses reserved in each child, so /31 point-to-point allocation is intentionally not used. Assumes an otherwise empty parent; existing reservations, growth buffers and routing policy are excluded.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.