Networking

Propagation & Store-and-Forward Latency Calculator

Separate physical propagation delay from packet serialization across equal-rate store-and-forward links.

How the calculation works

One-way propagation delay = distance*1000*index/299792458*1000 ms. One link serialization time = bytes*8/(link_mbps*1e6)*1000 ms. Sum of serialization times = links*bytes*8/(link_mbps*1e6)*1000 ms. Modelled one-way base latency = distance*1000*index/299792458*1000+links*bytes*8/(link_mbps*1e6)*1000 ms.

Worked example

Example inputs — Total physical path length (km): 100; Propagation index: c / medium speed: 1.5; Packet bytes serialized per link: 1500; Bit rate of each equal-rate link (Mbps): 1000; Store-and-forward links traversed: 3. Expected results — One-way propagation delay: 0.5003461428 ms; One link serialization time: 0.012 ms; Sum of serialization times: 0.036 ms; Modelled one-way base latency: 0.5363461428 ms.

Assumptions and limits

Offline planning arithmetic: this calculator sends no packets and changes no device configuration. Actual routing, reservations, implementation limits and measured network conditions must be checked separately. Equal link rates, packet not pipelined through a cut-through switch, and no queue, processing or handshake delay. Distance is cable/radio path length, not map straight-line distance.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.