Networking
Ethernet TCP Payload Goodput Budget Calculator
Estimate large-packet payload efficiency from IP MTU and explicitly entered framing/header overheads.
How the calculation works
TCP payload per full packet = mtu-ip_header-tcp_header bytes. Payload efficiency = (mtu-ip_header-tcp_header)/(mtu+wire_overhead)*100 %. Ideal full-packet payload goodput = link_mbps*(mtu-ip_header-tcp_header)/(mtu+wire_overhead) Mbps. Full-size packet rate = link_mbps*1e6/(8*(mtu+wire_overhead)) packets/s.
Worked example
Example inputs — Link bit rate (Mbps): 1000; IP packet MTU (bytes): 1500; IP header bytes: 20; TCP header bytes: 20; Non-IP per-packet wire overhead incl. interpacket spacing (bytes): 38. Expected results — TCP payload per full packet: 1460 bytes; Payload efficiency: 94.92847854 %; Ideal full-packet payload goodput: 949.2847854 Mbps; Full-size packet rate: 81274.38231 packets/s.
Assumptions and limits
Offline planning arithmetic: this calculator sends no packets and changes no device configuration. Actual routing, reservations, implementation limits and measured network conditions must be checked separately. Defaults model ordinary untagged full-size Ethernet packets. Overhead is explicit so VLAN/tunnel framing can be changed. ACK traffic, short frames, losses and application headers are excluded.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- IPv4 Subnet, Host Range & Mask Calculator
- Smallest IPv4 Covering Prefix Calculator
- IPv4 Range to Exact CIDR Blocks Calculator
- IPv4 VLSM Host Requirement Planner
- IPv6 Prefix & Exact Address Capacity Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.