Networking
Bandwidth-Delay Product & TCP Window Calculator
Compare a connection’s in-flight data requirement with a selected receive-window limit.
How the calculation works
Bandwidth-delay product = bandwidth*1e6*rtt*.001/8 bytes. Window-limited throughput ceiling = window_kib*1024*8/(rtt*.001)/1e6 Mbps. Ceiling after link limit = min(bandwidth,window_kib*1024*8/(rtt*.001)/1e6) Mbps.
Worked example
Example inputs — Bottleneck link capacity (Mbps): 100; Round-trip time (ms): 50; Available TCP receive window (KiB): 64. Expected results — Bandwidth-delay product: 625000 bytes; Window-limited throughput ceiling: 10.48576 Mbps; Ceiling after link limit: 10.48576 Mbps.
Assumptions and limits
Offline planning arithmetic: this calculator sends no packets and changes no device configuration. Actual routing, reservations, implementation limits and measured network conditions must be checked separately. Simplified steady-state window ceiling. Congestion window, losses, application pacing, ACK behaviour, scaling negotiation and protocol overhead can limit throughput further.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- IPv4 Subnet, Host Range & Mask Calculator
- Smallest IPv4 Covering Prefix Calculator
- IPv4 Range to Exact CIDR Blocks Calculator
- IPv4 VLSM Host Requirement Planner
- IPv6 Prefix & Exact Address Capacity Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.