Electronics
RL Current Step Response Calculator
Calculate inductor current and voltage following a DC step in a series resistor-inductor circuit.
How the calculation works
Electrical time constant = inductance*.001/resistance s. Inductor current = supply/resistance+(initial_current-supply/resistance)*exp(-time/(inductance*.001/resistance)) A. Inductor voltage = (supply-resistance*initial_current)*exp(-time/(inductance*.001/resistance)) V.
Worked example
Example inputs — Total series resistance (ohms): 10; Inductance (mH): 1000; Initial inductor current (A): 0; Applied constant DC voltage (V): 10; Elapsed time (s): 0.1. Expected results — Electrical time constant: 0.1 s; Inductor current: 0.6321205588 A; Inductor voltage: 3.678794412 V.
Assumptions and limits
Idealized circuit arithmetic. Component ratings, tolerances, temperature, transients, isolation and electrical safety require independent checks; this tool does not certify a circuit. Ideal linear inductance and resistance. Real switching requires a current path and voltage-clamp design; this is not a safe disconnect circuit.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Resistive Load Current & Dissipation Calculator
- Three Resistor Series & Parallel Calculator
- Three Capacitor Series & Parallel Calculator
- Uncoupled Inductor Network Calculator
- Loaded Voltage Divider Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.