Electronics
Loaded Voltage Divider Calculator
Calculate divider output after a load resistor is placed across the lower divider resistor.
How the calculation works
Unloaded output = supply*lower/(upper+lower) V. Loaded output = supply*(lower*load/(lower+load))/(upper+lower*load/(lower+load)) V. Loading voltage error = supply*lower/(upper+lower)-supply*(lower*load/(lower+load))/(upper+lower*load/(lower+load)) V.
Worked example
Example inputs — Input supply (V): 12; Upper resistor (ohms): 10000; Lower resistor (ohms): 10000; Load resistance across lower resistor (ohms): 10000. Expected results — Unloaded output: 6 V; Loaded output: 4 V; Loading voltage error: 2 V.
Assumptions and limits
Idealized circuit arithmetic. Component ratings, tolerances, temperature, transients, isolation and electrical safety require independent checks; this tool does not certify a circuit. Resistive DC load only. A divider is not a voltage regulator; supply changes, input bias current and load changes alter output.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Resistive Load Current & Dissipation Calculator
- Three Resistor Series & Parallel Calculator
- Three Capacitor Series & Parallel Calculator
- Uncoupled Inductor Network Calculator
- Two-Branch Current Divider Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.