Electronics

Three Resistor Series & Parallel Calculator

Compare equivalent resistance and applied-voltage dissipation for three ideal resistors in series or parallel.

How the calculation works

Series equivalent = r_a+r_b+r_c ohms. Parallel equivalent = 1/(1/r_a+1/r_b+1/r_c) ohms. Series network dissipation = voltage**2/(r_a+r_b+r_c) W. Parallel network dissipation = voltage**2*(1/r_a+1/r_b+1/r_c) W.

Worked example

Example inputs — First resistance (ohms): 100; Second resistance (ohms): 200; Third resistance (ohms): 300; Voltage across the complete network (V): 12. Expected results — Series equivalent: 600 ohms; Parallel equivalent: 54.54545455 ohms; Series network dissipation: 0.24 W; Parallel network dissipation: 2.64 W.

Assumptions and limits

Idealized circuit arithmetic. Component ratings, tolerances, temperature, transients, isolation and electrical safety require independent checks; this tool does not certify a circuit. These are two different wiring configurations, not one mixed series-parallel topology. Wire resistance is excluded.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.