Electronics

Passive RC Low-Pass & High-Pass Filter Calculator

Compare the magnitude and phase of ideal first-order RC low-pass and high-pass responses at one frequency.

How the calculation works

Cutoff frequency = 1/(2*pi*resistance*capacitance*1e-6) Hz. Low-pass voltage gain = 1/sqrt(1+(2*pi*frequency*resistance*capacitance*1e-6)**2) ratio. High-pass voltage gain = 2*pi*frequency*resistance*capacitance*1e-6/sqrt(1+(2*pi*frequency*resistance*capacitance*1e-6)**2) ratio. Low-pass phase = -atan(2*pi*frequency*resistance*capacitance*1e-6)*180/pi degrees.

Worked example

Example inputs — Resistance (ohms): 1000; Capacitance (µF): 1; Signal frequency (Hz): 159.15494309189535. Expected results — Cutoff frequency: 159.1549431 Hz; Low-pass voltage gain: 0.7071067812 ratio; High-pass voltage gain: 0.7071067812 ratio; Low-pass phase: -45 degrees.

Assumptions and limits

Idealized circuit arithmetic. Component ratings, tolerances, temperature, transients, isolation and electrical safety require independent checks; this tool does not certify a circuit. Unloaded filter driven by an ideal zero-impedance source. Actual source/load impedances modify the transfer function.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.