Electronics
Series-Parallel Battery Pack Arithmetic Calculator
Calculate nominal pack voltage, capacity and energy from identical cells and a chosen series-parallel layout.
How the calculation works
Total cells = series*parallel cells. Nominal pack voltage = cell_voltage*series V. Nominal pack capacity = cell_capacity*parallel Ah. Nominal pack energy = cell_voltage*cell_capacity*series*parallel Wh.
Worked example
Example inputs — Nominal cell voltage (V): 3.7; Cell capacity (Ah): 2.5; Cells in each series string: 4; Parallel strings: 3. Expected results — Total cells: 12 cells; Nominal pack voltage: 14.8 V; Nominal pack capacity: 7.5 Ah; Nominal pack energy: 111 Wh.
Assumptions and limits
Idealized circuit arithmetic. Component ratings, tolerances, temperature, transients, isolation and electrical safety require independent checks; this tool does not certify a circuit. Identical balanced cells at rated conditions. Does not design a BMS, protection, charging, interconnects or safe discharge limits; series-parallel construction can be hazardous.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Resistive Load Current & Dissipation Calculator
- Three Resistor Series & Parallel Calculator
- Three Capacitor Series & Parallel Calculator
- Uncoupled Inductor Network Calculator
- Loaded Voltage Divider Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.