Agriculture & Growing

Soil Porosity, Water-Filled Pores & Available Storage Calculator

Relate dry bulk density and particle density to pore space and estimate root-zone water storage from volumetric measurements.

How the calculation works

porosity = 1-bulk/particle. Total porosity = porosity*100 %. Water-filled fraction of pore space = theta/porosity*100 %. Air-filled pore fraction of soil volume = (porosity-theta)*100 %. Current water depth = theta*depth*1000 mm. Total plant-available storage = (fc-wp)*depth*1000 mm. Current depletion below field capacity = max(0,fc-theta)*depth*1000 mm.

Worked example

Example inputs — Dry bulk density (g/cm³): 1.325; Solid particle density (g/cm³): 2.65; Current volumetric water fraction: 0.25; Field-capacity volumetric water fraction: 0.3; Wilting-point volumetric water fraction: 0.1; Root-zone thickness (m): 0.6. Expected results — Total porosity: 50 %; Water-filled fraction of pore space: 50 %; Air-filled pore fraction of soil volume: 25 %; Current water depth: 150 mm; Total plant-available storage: 120 mm; Current depletion below field capacity: 30 mm.

Assumptions and limits

Planning model using supplied measurements and local coefficients. Defaults are examples, not recommended crop targets or a weather forecast. Uniform layer, dry bulk density, no coarse-fragment correction or swelling/shrinkage. Particle density is editable; 2.65 is only a mineral-soil example. Current depletion is zero above field capacity, and storage above field capacity is not treated as plant-available capacity. Use measured local field capacity/wilting point rather than texture defaults.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.