Agriculture & Growing

Grain Wet/Dry Moisture & Drying Shrink Calculator

Conserve dry solids while changing grain moisture and distinguish wet-basis moisture, dry-basis moisture and water shrink.

How the calculation works

dry = mass*(1-initial/100). Conserved dry-solid mass = dry kg. Final mass at target moisture = dry/(1-final/100) kg. Water removed, negative means added = mass-dry/(1-final/100) kg. Water-only mass shrink = (1-(1-initial/100)/(1-final/100))*100 %. Initial moisture, dry basis = initial/(100-initial)*100 %. Target moisture, dry basis = final/(100-final)*100 %.

Worked example

Example inputs — Initial wet grain mass (kg): 1000; Initial moisture, wet basis (%): 25; Target moisture, wet basis (%): 15. Expected results — Conserved dry-solid mass: 750 kg; Final mass at target moisture: 882.3529412 kg; Water removed, negative means added: 117.6470588 kg; Water-only mass shrink: 11.76470588 %; Initial moisture, dry basis: 33.33333333 %; Target moisture, dry basis: 17.64705882 %.

Assumptions and limits

Planning model using supplied measurements and local coefficients. Defaults are examples, not recommended crop targets or a weather forecast. Water-only mass balance. No dry-matter handling loss, spoilage, grade/test-weight changes or commercial shrink factors. If target moisture exceeds initial moisture, a negative removed-water/shrink value represents rewetting. Wet-basis % uses total mass; dry-basis % uses dry solids.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.