Agriculture & Growing
Hourly Chill Accumulation & Requirement Calculator
Count observed hourly temperature intervals inside an editable chill window and compare with a chosen requirement.
How the calculation works
Give each one-hour interval a weight of one when lower ≤ T < upper, otherwise zero. Sum weights and compare with the entered requirement.
Worked example
Example inputs — Consecutive one-hour mean temperatures (°C): -1, 0, 2, 7, 7.2, 10; Inclusive lower temperature (°C): 0; Exclusive upper temperature (°C): 7.2; Chosen chill-hour requirement: 500. Expected results — Accumulated qualifying hours: 3 hours; Supplied one-hour intervals: 6 hours; Chosen requirement completed: 0.6 %; Remaining qualifying hours: 497 hours.
Assumptions and limits
Planning model using supplied measurements and local coefficients. Defaults are examples, not recommended crop targets or a weather forecast. Simple temperature-window chill-hour model. Each observation represents exactly one full hour; the lower cutoff is inclusive and upper cutoff exclusive. Does not implement Utah units or the Dynamic Model, warm-temperature negation, cultivar calibration, flowering prediction or hourly weather reconstruction.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Growing Degree-Day Series & Target Calculator
- Daily Root-Zone Water Balance & Depletion Trigger Calculator
- Sprinkler Catch-Can Uniformity & Application Rate Calculator
- Grain Wet/Dry Moisture & Drying Shrink Calculator
- Soil Porosity, Water-Filled Pores & Available Storage Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.