Sound & Audio

Loudspeaker Sensitivity Power & Level Calculator

Estimate free-field sound level from loudspeaker sensitivity expressed per watt at one metre.

How the calculation works

Ideal modelled sound level = sensitivity+10*log10(power)-20*log10(distance) dB SPL. RMS drive voltage under resistive assumption = sqrt(power*impedance) V.

Worked example

Example inputs — Sensitivity at 1 W / 1 m (dB SPL): 90; Electrical input power (W): 10; Listening distance (m): 2; Nominal load resistance for voltage estimate (ohms): 8. Expected results — Ideal modelled sound level: 93.97940009 dB SPL; RMS drive voltage under resistive assumption: 8.94427191 V.

Assumptions and limits

Idealized acoustic/audio arithmetic with matching RMS, frequency and reference conventions. Real rooms, transducers and devices need measurement; this result is not a hearing-exposure or building-compliance assessment. Sensitivity must be 1 W/1 m, not 2.83 V/1 m unless impedance conversion is made. Excludes room gain, directivity variation, power compression, excursion and maximum-output limits.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.