Heat & Thermodynamics

Three-Layer Wall Heat Transfer Calculator

Calculate one-dimensional steady conduction through three layers in series, including surface film resistances.

How the calculation works

Total area-normalized thermal resistance = thickness_a/conductivity_a+thickness_b/conductivity_b+thickness_c/conductivity_c+film_resistance m²·K/W. Overall U-value = 1/(thickness_a/conductivity_a+thickness_b/conductivity_b+thickness_c/conductivity_c+film_resistance) W/m²/K. Signed heat flow = area*delta_t/(thickness_a/conductivity_a+thickness_b/conductivity_b+thickness_c/conductivity_c+film_resistance) W.

Worked example

Example inputs — Wall area (m²): 10; Layer A thickness (m): 0.1; Layer A conductivity (W/m/K): 0.04; Layer B thickness (m): 0.1; Layer B conductivity (W/m/K): 0.5; Layer C thickness (m): 0.01; Layer C conductivity (W/m/K): 0.2; Combined surface film resistance (m²·K/W): 0.25; Inside minus outside temperature (K): 20. Expected results — Total area-normalized thermal resistance: 3 m²·K/W; Overall U-value: 0.3333333333 W/m²/K; Signed heat flow: 66.66666667 W.

Assumptions and limits

Idealized thermal model using the supplied material properties. Values depend on actual temperatures and conditions; no equipment rating, burn protection or building compliance is established. Uniform layers in series with no thermal bridges, moisture, air leakage, solar gain or transient storage. Not a building-code U-value certification.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.