Heat & Thermodynamics
Isotropic Solid Thermal Expansion Calculator
Estimate dimensional and volume expansion of an isotropic solid under a uniform temperature change.
How the calculation works
Length change = length*alpha_micro*1e-6*delta_t m. Final length = length*(1+alpha_micro*1e-6*delta_t) m. Approximate volume change = volume*3*alpha_micro*1e-6*delta_t m³.
Worked example
Example inputs — Original length (m): 2; Original volume (m³): 0.01; Linear expansion coefficient (µm/m/K): 12; Temperature change (K or °C difference): 50. Expected results — Length change: 0.0012 m; Final length: 2.0012 m; Approximate volume change: 1.8e-05 m³.
Assumptions and limits
Idealized thermal model using the supplied material properties. Values depend on actual temperatures and conditions; no equipment rating, burn protection or building compliance is established. Constant isotropic linear coefficient; volumetric coefficient is approximated as three times the linear coefficient. Anisotropy and constraints are excluded.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Fully Restrained Thermal Stress Calculator
- Thermal Expansion Liquid Overflow Calculator
- Two-Body Mixing Equilibrium Temperature Calculator
- Latent Heat Phase Change Calculator
- Heating through a Phase Change Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.