Heat & Thermodynamics
Lumped Object Cooling Temperature Calculator
Estimate temperature after a cooling interval using an ideal lumped-capacitance model.
How the calculation works
Thermal time constant = mass*specific_heat/(coefficient*area) s. Object temperature = ambient+(initial-ambient)*exp(-coefficient*area*time/(mass*specific_heat)) °C.
Worked example
Example inputs — Object mass (kg): 1; Specific heat (J/kg/K): 1000; Convecting area (m²): 1; Convection coefficient (W/m²/K): 10; Initial object temperature (°C): 80; Constant fluid temperature (°C): 20; Elapsed time (s): 100. Expected results — Thermal time constant: 100 s; Object temperature: 42.07276647 °C.
Assumptions and limits
Idealized thermal model using the supplied material properties. Values depend on actual temperatures and conditions; no equipment rating, burn protection or building compliance is established. Internally uniform temperature, constant properties and convection only. The lumped assumption usually requires a suitably small Biot number; radiation and phase change are excluded.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Isotropic Solid Thermal Expansion Calculator
- Fully Restrained Thermal Stress Calculator
- Thermal Expansion Liquid Overflow Calculator
- Two-Body Mixing Equilibrium Temperature Calculator
- Latent Heat Phase Change Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.