Heat & Thermodynamics
Heat Pump & Refrigerator COP Calculator
Resolve heating COP, refrigeration COP and heat extraction from electrical/work input and delivered heat.
How the calculation works
Heating COP = heat_delivered/work ratio. Heat extracted from cold side = heat_delivered-work kWh. Refrigeration COP = (heat_delivered-work)/work ratio.
Worked example
Example inputs — Work/electrical input over interval (kWh): 1; Heat delivered to warm side (kWh): 4. Expected results — Heating COP: 4 ratio; Heat extracted from cold side: 3 kWh; Refrigeration COP: 3 ratio.
Assumptions and limits
Idealized thermal model using the supplied material properties. Values depend on actual temperatures and conditions; no equipment rating, burn protection or building compliance is established. All energy values cover the same boundary and interval. COP is not a percentage efficiency and varies with operating temperatures, defrost and auxiliaries.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Isotropic Solid Thermal Expansion Calculator
- Fully Restrained Thermal Stress Calculator
- Thermal Expansion Liquid Overflow Calculator
- Two-Body Mixing Equilibrium Temperature Calculator
- Latent Heat Phase Change Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.