Heat & Thermodynamics
Heat Engine Efficiency & Carnot Limit Calculator
Compare a heat engine’s measured heat balance with the reversible efficiency limit between two reservoirs.
How the calculation works
Net work per cycle = heat_in-heat_out kJ. Actual heat-balance efficiency = (1-heat_out/heat_in)*100 %. Carnot efficiency limit = (1-cold/hot)*100 %.
Worked example
Example inputs — Heat input per cycle (kJ): 100; Rejected heat per cycle (kJ): 60; Hot-reservoir temperature (K): 600; Cold-reservoir temperature (K): 300. Expected results — Net work per cycle: 40 kJ; Actual heat-balance efficiency: 40 %; Carnot efficiency limit: 50 %.
Assumptions and limits
Idealized thermal model using the supplied material properties. Values depend on actual temperatures and conditions; no equipment rating, burn protection or building compliance is established. Reservoir temperatures are absolute. An entered actual efficiency above the Carnot limit indicates inconsistent data or model assumptions, not a valid engine.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Isotropic Solid Thermal Expansion Calculator
- Fully Restrained Thermal Stress Calculator
- Thermal Expansion Liquid Overflow Calculator
- Two-Body Mixing Equilibrium Temperature Calculator
- Latent Heat Phase Change Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.