Heat & Thermodynamics
Sealed Ideal Gas State Change Calculator
Relate two pressure-volume-temperature states of a fixed amount of ideal gas.
How the calculation works
Final absolute pressure = pressure_a*volume_a*temp_b/(temp_a*volume_b) kPa. Pressure ratio = volume_a*temp_b/(temp_a*volume_b) ratio.
Worked example
Example inputs — Initial absolute pressure (kPa): 100; Initial volume (litres): 10; Initial temperature (K): 300; Final volume (litres): 5; Final temperature (K): 450. Expected results — Final absolute pressure: 300 kPa; Pressure ratio: 3 ratio.
Assumptions and limits
Idealized thermal model using the supplied material properties. Values depend on actual temperatures and conditions; no equipment rating, burn protection or building compliance is established. Same gas amount in both states. This state relation does not specify the process, work, heat transfer or whether the change is adiabatic.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Isotropic Solid Thermal Expansion Calculator
- Fully Restrained Thermal Stress Calculator
- Thermal Expansion Liquid Overflow Calculator
- Two-Body Mixing Equilibrium Temperature Calculator
- Latent Heat Phase Change Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.