Optics & Imaging
Optical Path Length & Phase Delay Calculator
Find optical path and unwrapped phase accumulated through a uniform transparent material.
How the calculation works
Optical path length = index*length*1000 µm. Accumulated phase cycles = index*length*1e6/wavelength cycles. Unwrapped phase delay = 2*pi*index*length*1e6/wavelength rad.
Worked example
Example inputs — Phase refractive index: 1.5; Material path length (mm): 0.001; Vacuum wavelength (nm): 500. Expected results — Optical path length: 1.5 µm; Accumulated phase cycles: 3 cycles; Unwrapped phase delay: 18.84955592 rad.
Assumptions and limits
Idealized optical model with the stated units and sign convention. Real components have dispersion, aberrations, tolerances and alignment limits; no laser or eye-safety rating is inferred. Uniform phase index at one wavelength. Group delay for pulses uses group index instead; relative phase requires subtracting the reference path.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Snell Refraction Angle Calculator
- Total Internal Reflection Critical Angle Calculator
- Fresnel Interface Reflectance Calculator
- Brewster Polarization Angle Calculator
- Thin Lens Image Distance & Magnification Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.