Optics & Imaging
Fresnel Interface Reflectance Calculator
Compare s-polarized, p-polarized and unpolarized power reflection from a lossless dielectric interface.
How the calculation works
s-polarized reflectance = 1 if n1*sin(angle*pi/180) >= n2 else ((n1*cos(angle*pi/180)-n2*sqrt(1-(n1*sin(angle*pi/180)/n2)**2))/(n1*cos(angle*pi/180)+n2*sqrt(1-(n1*sin(angle*pi/180)/n2)**2)))**2 fraction. p-polarized reflectance = 1 if n1*sin(angle*pi/180) >= n2 else ((n1*sqrt(1-(n1*sin(angle*pi/180)/n2)**2)-n2*cos(angle*pi/180))/(n1*sqrt(1-(n1*sin(angle*pi/180)/n2)**2)+n2*cos(angle*pi/180)))**2 fraction.
Worked example
Example inputs — Incident refractive index: 1; Transmitted refractive index: 1.5; Incident angle from normal (degrees): 0. Expected results — s-polarized reflectance: 0.04 fraction; p-polarized reflectance: 0.04 fraction.
Assumptions and limits
Idealized optical model with the stated units and sign convention. Real components have dispersion, aberrations, tolerances and alignment limits; no laser or eye-safety rating is inferred. Planar interface, real nonabsorbing indices and no coating. At total internal reflection both power reflectances are one; evanescent fields and phase shifts are not calculated.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Snell Refraction Angle Calculator
- Total Internal Reflection Critical Angle Calculator
- Brewster Polarization Angle Calculator
- Thin Lens Image Distance & Magnification Calculator
- Thin Lensmaker Focal Length Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.