Energy

Wind Turbine Power-Curve Energy Profile Calculator

Estimate energy from observed wind speeds by interpolating an entered turbine power curve.

How the calculation works

Linearly interpolate entered power against wind-speed points for each interval; use zero outside the table. Sum interpolated kW × interval hours. Capacity factor = energy ÷ (rated kW × total hours).

Worked example

Example inputs — Observed interval wind speeds (m/s): 0, 3, 6, 9, 12, 25; Power-curve wind speed points, increasing (m/s): 0, 3, 6, 9, 12, 25; Corresponding power-curve values (kW): 0, 0, 2, 6, 10, 0; Duration of each wind interval (minutes): 60; Turbine rated power (kW): 10. Expected results — Estimated energy: 18 kWh; Mean modeled power: 3 kW; Peak interval modeled power: 10 kW; Capacity factor over supplied intervals: 30 %; Intervals with positive modeled output: 3 intervals; Number of supplied intervals: 6 intervals.

Assumptions and limits

Power curve is user-entered and linearly interpolated between points. Outside its supplied speed range output is zero; include the appropriate cut-in, rated and cut-out behavior explicitly. Input speed is one constant interval representative at turbine hub height. Averaging wind speeds before applying a nonlinear power curve biases energy; coarse intervals, air density, turbulence, wake, availability, icing and electrical losses are not modeled. This is not a site assessment or guaranteed production.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.