Energy
Battery Energy & Runtime Calculator
Estimate constant-load runtime from voltage, amp-hours, usable discharge and conversion efficiency.
How the calculation works
Nominal Wh = volts × amp-hours. Delivered Wh = nominal Wh × usable fraction × efficiency. Runtime hours = delivered Wh ÷ load watts.
Worked example
12 V × 100 Ah gives 1200 Wh nominal. With 80% usable and 90% efficiency, 864 Wh reaches the load, giving 8.64 hours at 100 W.
Assumptions and limits
Simplified estimate. Temperature, ageing, battery chemistry, discharge rate, inverter idle use and protection cut-offs affect actual runtime. Not a wiring or battery-safety design tool.
Related calculators
- Appliance Electricity Cost Calculator
- LED Lighting Energy Savings Calculator
- Solar Daily Energy Scenario Calculator
- EV Charging Time & Energy Cost Calculator
- Water Heating Energy & Time Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.