Energy
PV Inverter Clipping from Power Profile Calculator
Apply conversion efficiency and an AC power limit to measured or modeled equal-duration solar DC power intervals.
How the calculation works
For each interval, potential AC power = DC power × efficiency; delivered power = min(potential AC, AC limit). Sum power × interval hours. Clipping loss is the difference between potential and delivered AC energy.
Worked example
Example inputs — DC power for each equal interval (kW): 0, 4, 8, 4; Duration of each interval (minutes): 60; Assumed constant conversion efficiency (%): 90; Inverter maximum AC output (kW): 5. Expected results — Input DC energy: 16 kWh; Potential AC energy before clipping: 14.4 kWh; Delivered AC energy: 12.2 kWh; AC-equivalent clipping loss: 2.2 kWh; Clipping loss fraction: 15.27777778 %; Peak delivered interval power: 5 kW.
Assumptions and limits
Each input represents constant average DC power for the whole equal-duration interval. Applies one constant conversion efficiency and an AC output cap to each interval; it cannot reconstruct subinterval peaks, weather, temperature, MPPT behavior, inverter efficiency curves, electrical safety or future annual yield. Coarse time steps can underestimate clipping. No battery storage or export curtailment is included.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Appliance Electricity Cost Calculator
- LED Lighting Energy Savings Calculator
- Battery Energy & Runtime Calculator
- Solar Daily Energy Scenario Calculator
- EV Charging Time & Energy Cost Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.