Home & Construction
Tile Grout Joint Volume Calculator
Estimate grout volume and mass for a repeating rectangular tile grid.
How the calculation works
Joint area fraction = 1 − tile length×tile width/((tile length+joint)×(tile width+joint)). Joint litres = area in m² × fraction × depth in mm. Mass adds density and allowance.
Worked example
10 m² of 300 × 300 mm tiles with 3 mm joints filled 5 mm deep has about 0.985 L of geometric joint space. At 1.6 kg/L and 10% extra, allow about 1.734 kg.
Assumptions and limits
Repeating-grid approximation without edge corrections. Product coverage, tile bevels, uneven joints, mixing yield and installation losses vary. Use the grout manufacturer’s coverage chart for ordering confirmation.
Related calculators
- Concrete Slab, Column & Hollow Form Calculator
- Room Paint & Can Calculator
- Flooring Boxes & Material Cost Calculator
- Tile & Pack Calculator
- Wallpaper Roll & Pattern Repeat Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.