Home & Construction
Tile & Pack Calculator
Estimate individual tiles and whole packs for a measured floor or wall area.
How the calculation works
Tile area = length × width ÷ 10,000. Required tiles = ceiling(net area × allowance ÷ tile area). Packs = ceiling(tiles ÷ pack size).
Worked example
For 12 m², 30 × 30 cm tiles and 10% extra, allow 147 tiles. Ten tiles per pack means 15 packs, containing 150 tiles.
Assumptions and limits
Uses tile face area without a grout deduction. It is a purchasing estimate, not a layout plan. Diagonal cuts, patterns and breakage may need a different allowance.
Related calculators
- Concrete Slab, Column & Hollow Form Calculator
- Room Paint & Can Calculator
- Flooring Boxes & Material Cost Calculator
- Wallpaper Roll & Pattern Repeat Calculator
- Gravel Volume, Weight & Bags Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.