Home & Construction

Paver & Pallet Calculator

Estimate paving units and whole pallets from area, unit size and nominal joint width.

How the calculation works

Nominal module area = (paver length + joint) × (paver width + joint) ÷ 1,000,000. Required count = ceiling(area ÷ module area × allowance).

Worked example

Twenty square metres of 200 × 100 mm units with zero added joint and 10% extra needs 1100 pavers, or three pallets of 500.

Assumptions and limits

Approximate repeating-grid count. Some manufacturers already include a joint in nominal dimensions. Patterns, edging and cuts are not laid out here.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.