Home & Construction

Insulation Area & Pack Calculator

Estimate pack count for one or more layers of sheet, slab or roll insulation.

How the calculation works

Material area = surface area × layers × allowance. Packs = ceiling(material area ÷ pack coverage). Total nominal thickness = layers × layer thickness.

Worked example

50 m² with two 50 mm layers and 10% extra requires 110 m² of material, or 22 packs at 5 m² each. Nominal thickness is 100 mm.

Assumptions and limits

Quantity only, not a heat-loss or condensation model. Compression, framing gaps, joints, fire requirements and product compatibility need separate assessment.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.