Home & Construction

Asphalt Driveway Material & Cost Estimate

Estimate asphalt volume, mass and material cost for a rectangular driveway with thickness and waste.

How the calculation works

Nominal volume = length times width times thickness converted from centimetres to metres. Apply the allowance, multiply by entered density for tonnes and multiply by price.

Worked example

Example inputs — Driveway length (m): 10; Driveway width (m): 3; Compacted asphalt thickness (cm): 5; Asphalt density (tonnes per m3): 2.35; Ordering allowance (%): 10; Asphalt price per tonne: 120. Expected results — Plan area: 30 m2; Nominal asphalt volume: 1.5 m3; Volume with allowance: 1.65 m3; Estimated asphalt mass: 3.8775 tonnes; Estimated material cost: 465.3 your currency.

Assumptions and limits

A rectangular material estimate, not a paving design or contractor quote. It excludes sub-base, grading, drainage, edge restraints, compaction variability, delivery minimums, taxes, labor, local specifications and actual mix density. Verify the required compacted thickness and supplier tonnage with a qualified contractor.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.