Transport & Traffic
Transit Route Fleet, Frequency & Capacity Calculator
Estimate scheduled vehicle requirement and capacity at a route’s maximum-load point using round-trip cycle time and headway.
How the calculation works
cycle = outbound+inbound+layover_a+layover_b. Complete vehicle cycle time = cycle minutes. Scheduled service frequency = 60/headway vehicles/hour/direction. Vehicles in service needed = ceil(cycle/headway) vehicles. Planning passengers per vehicle = seats*load_factor passengers. Scheduled directional capacity = 60/headway*seats*load_factor passengers/hour. Demand as share of scheduled capacity = demand/(60/headway*seats*load_factor)*100 %. Whole departures per hour for demand = ceil(demand/(seats*load_factor)) departures/hour. Vehicles for that integer hourly frequency = ceil(cycle*ceil(demand/(seats*load_factor))/60) vehicles.
Worked example
Example inputs — Outbound running time (minutes): 30; Inbound running time (minutes): 25; Terminal A layover and recovery (minutes): 5; Terminal B layover and recovery (minutes): 5; Scheduled headway (minutes): 10; Seats per vehicle: 40; Planning passengers per seat ratio: 1.2; Peak load-point demand (passengers/hour/direction): 240. Expected results — Complete vehicle cycle time: 65 minutes; Scheduled service frequency: 6 vehicles/hour/direction; Vehicles in service needed: 7 vehicles; Planning passengers per vehicle: 48 passengers; Scheduled directional capacity: 288 passengers/hour; Demand as share of scheduled capacity: 83.33333333 %; Whole departures per hour for demand: 5 departures/hour; Vehicles for that integer hourly frequency: 6 vehicles.
Assumptions and limits
Steady evenly spaced departures, identical vehicles and a single route with one vehicle per departure. Running time includes stop dwell; layovers include separately estimated recovery. The load factor is passengers per seat and may exceed 1 if standing is permitted. Required vehicles are rounded up and exclude spare fleet, operator shifts, deadheads, charging and irregular scheduling. Demand is the maximum simultaneous load crossing one point per direction, not total boardings over a route.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Traffic Flow, Density & Mean Headway Calculator
- Greenshields Traffic Speed–Density & Capacity Calculator
- Signalized Movement Capacity & Saturation Calculator
- Traffic Shockwave Speed & Position Calculator
- Two-Signal Progression Offset Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.