Fluids & Hydraulics
Liquid Bulk Modulus Compression Calculator
Estimate a liquid volume change under a small pressure increase using bulk modulus.
How the calculation works
Volume reduction = volume*pressure_change/(bulk_modulus*1000) L. Approximate final volume = volume*(1-pressure_change/(bulk_modulus*1000)) L. Volumetric strain magnitude = pressure_change/(bulk_modulus*1000) ratio.
Worked example
Example inputs — Initial liquid volume (L): 100; Pressure increase (MPa): 10; Bulk modulus (GPa): 2. Expected results — Volume reduction: 0.5 L; Approximate final volume: 99.5 L; Volumetric strain magnitude: 0.005 ratio.
Assumptions and limits
Simplified fluid model with SI inputs. Results are not a pressure-vessel, piping-code, flood-control or safety certification. Constant bulk modulus and small compression. Entrained gas, temperature changes, container deformation and high-pressure nonlinearities are excluded.
Reference and further reading
Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.
Related calculators
- Fluid Density & Specific Weight Calculator
- Hydrostatic Gauge & Absolute Pressure Calculator
- Differential Manometer Pressure Calculator
- Ideal Hydraulic Press Force & Stroke Calculator
- Buoyant Force & Apparent Weight Calculator
Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.