Cooking & Baking

Coffee Extraction Yield & Beverage Strength Calculator

Estimate dissolved coffee mass and extraction yield from dry dose, finished beverage mass and measured beverage TDS.

How the calculation works

Estimated dissolved solids in finished beverage = beverage*tds/100 g. Estimated extraction yield from dry dose = beverage*tds/dose %. Input water-to-coffee ratio = water/dose :1. Finished beverage-to-coffee mass ratio = beverage/dose :1. Input water minus beverage mass = water-beverage g.

Worked example

Example inputs — Dry ground coffee mass (g): 15; Finished beverage mass (g): 250; Measured beverage total dissolved solids (%): 1.2; Brew input water mass (g): 270. Expected results — Estimated dissolved solids in finished beverage: 3 g; Estimated extraction yield from dry dose: 20 %; Input water-to-coffee ratio: 18 :1; Finished beverage-to-coffee mass ratio: 16.66666667 :1; Input water minus beverage mass: 20 g.

Assumptions and limits

Estimate assumes beverage TDS is the mass fraction of extracted coffee solids, measured consistently and without added milk, sugar or bypass water containing other dissolved solids. Finished beverage mass is not input water mass; retained liquid and sampling affect the balance. Difference between input water and beverage is not a direct grounds-retention measurement because dissolved coffee contributes mass. This does not prescribe an ideal taste or extraction target.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.