Chemistry

Dissolved Oxygen Saturation & Deficit Calculator

Estimate equilibrium oxygen concentration and compare a measured dissolved-oxygen value with saturation.

How the calculation works

kelvin = temperature+273.15. salinity = 0.0005572*conductivity+0.00000000202*conductivity**2. vapor = 4.5844*exp(17.67*temperature/(temperature+243.5)). saturation = 1.4276*exp(-173.4292+249.6339*100/kelvin+143.3483*log(kelvin/100)-21.8492*kelvin/100+salinity*(-0.033096+0.014259*kelvin/100-0.0017*(kelvin/100)**2))*(pressure-vapor)/(760-vapor). Estimated equilibrium dissolved oxygen = saturation mg/L. Measured oxygen saturation = measured/saturation*100 %. Oxygen deficit (negative means supersaturation) = saturation-measured mg/L.

Worked example

Example inputs — Water temperature (°C): 20; Specific conductance at 25°C (µS/cm): 0; Absolute barometric pressure (mm Hg): 760; Measured dissolved oxygen (mg/L): 8. Expected results — Estimated equilibrium dissolved oxygen: 9.067446456 mg/L; Measured oxygen saturation: 88.22770599 %; Oxygen deficit (negative means supersaturation): 1.067446456 mg/L.

Assumptions and limits

USGS-form Weiss-based approximation, using specific conductance to estimate salinity and a vapor-pressure correction; pressure is measured absolute atmospheric pressure, not a sea-level-adjusted weather report. Applicability depends on natural-water ionic composition and empirical fit; temperature and conductivity are restricted here. Supersaturation is possible. This does not diagnose ecosystem health, calibrate an instrument, prescribe aeration or guarantee safety.

Reference and further reading

Read the underlying subject reference. Calculith is an independent implementation; the reference does not endorse or certify this tool.

Related calculators

Browse all 1000 calculators →

Example values are editable. Results are estimates where assumptions apply. Calculations run in your browser. Updated 2026-11-16.