Aquarium Tank Volume Calculator

Formulas and example

Rectangular base area A = length × width. Cylinder A = π × (diameter ÷ 2)². Bow front approximation A = length × side width + π × length × (centre width − side width) ÷ 4. Dimensions are converted to centimetres.

Geometric volume = A × water-line height ÷ 1000 litres. Estimated water volume = A × (height − substrate depth) ÷ 1000 × (1 − decor displacement ÷ 100). A 90 × 35 × 40 cm tank with 5 cm substrate and 10% extra displacement gives 126 L geometric volume and 99.225 L estimated water volume. Bow fronts use a half-ellipse approximation and may differ from the actual glass profile.

Estimate substrate quantity · Calculate nitrate dilution · Convert litres and gallons

Measure the inside, not the outside

Use the inside dimensions between the glass panes and the actual water-line height rather than the external tank dimensions. Product capacity labels, glass thickness, headspace, substrate and decorations can all affect how much water a tank holds.

Why real water volume matters

Water volume is an input to many aquarium calculations. Geometric capacity differs from the water held around substrate, rocks and equipment. This tool subtracts an optional full substrate layer and a separate editable decor-displacement percentage. The 10% value is only an example; actual displacement varies. For critical dosing, confirm the volume independently and follow the product instructions.

Bow-front and cylindrical tanks

For bow fronts, measure the width at the side pane and at the widest central point; the calculator treats the bulge as a half ellipse. For cylinders, the diameter is enough — measure across the widest point of the circle.

Frequently asked questions

How much does a full aquarium weigh? This tool estimates fresh-water mass at approximately 1 kg per litre. Add the separately measured tank, stand, substrate and equipment masses for total load. It does not assess floor capacity; salt water and temperature change water density.

How much substrate do I need? Use the substrate volume result or the linked substrate calculator. Enter the density supplied for your actual product to estimate dry mass. Depth is a user-selected design choice.

Can this select a heater or filtration system? No. Heater sizing depends on heat loss and temperature difference; filtration depends on more than water volume. Follow equipment guidance for the actual setup.